Ardoise Photo - Finition Brillante - 30 cm x 30 cm - CARRÉ
Ardoise Photo - Finition Brillante - 30 cm x 30 cm - CARRÉ - Single est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Impossible de charger la disponibilité pour le Service de retrait
- Ardoise noire de haute qualité avec une zone enduite par sublimation blanche et lisse pour l'impression de photos ou d'œuvres d'art sur mesure
- Livré avec une finition brillante (pas une finition mate)
- Une façon tout à fait unique d'afficher des images à la maison ou au bureau
- Mesure 30 cm x 30 cm avec une zone imprimable de 28,5 cm x 28,5 cm
- Également disponible en format 15 cm x 15 cm et 20 cm x 20 cm
- ATTENTION : Avec ces ardoises photo, vous devez les presser à l'envers pour que la chaleur traverse l'ardoise. Ne chauffez pas le papier directement car cela le brûlerait et la finition ne serait pas celle requise. L’utilisation d’un tapis en silicone permettra de sublimer les bords rugueux de l’ardoise pour créer une image homogène.
- De superbes photos aux couleurs vives comme alternative aux cadres photo standards
- Panneaux personnalisés pour mariages ou occasions spéciales
- Oeuvres ou designs sur mesure sur cette ardoise de roche polie
Please Note: Due to the natural composition of slate, slight variations in size, shape, texture, and edge finish are completely normal and to be expected. These natural characteristics are part of what makes each photo slate unique. All sublimation photo slates—regardless of manufacturer—may differ slightly from the stated dimensions. As such, minor discrepancies will not be considered defects and are not eligible for refunds or replacements.
Troubleshooting & Tips
Troubleshooting & Tips
We have tested these photo slates and recommend pressing them upside down so that the heat goes through the back of the photo slate. Heating the paper directly can cause the paper to burn and the result will not be as required.
If you are not getting good results by heating through the slate you can also heat the slate face up i.e. heating the sublimation paper directly. However if you are doing this please ensure you halve the heating time listed below. e.g. if it says 8 minutes change this to 4 minutes.
We always recommend using our 2mm thin silicone FAB Pad so that you can sublimate on the rough edges of the slate to create a seamless image.
Larger slates are generally not suitable for clamshell presses as placing the slate too close to the hinged area can apply too much pressure and crack the slate. Swing away presses are best suited for this.
We also recommend pre-heating slates if they have been stored in a colder area as the sudden temperature change can cause cracking.
Ardoise Photo - Finition Brillante - 30 cm x 30 cm - CARRÉ
Important Note: The times and temperatures below apply only to the equipment listed in the Specifications tab. These are guideline settings based on tests we've run using various machines to reflect typical customer setups. Your results may vary depending on your equipment, so some trial and error may be needed. Please contact us if you're unsure, as we can't be responsible for issues caused by incorrect settings.
-
Pressing Time
-
Temperature
-
Pressure
-
Equipment
-
Material
-
Dimensions
-
Finish
-
Colour
-
Print Applications
