Wholesale Carton - 40 x Matt Finish Small Blank Square (15cm x 15cm) Sublimation Photo Slates with Stands

SKU: CARTON-PS-MATT-SQR-SML
£86.00
ex. VAT
Shipping calculated at checkout.


PLEASE NOTE THAT THIS LISTING IS FOR A FULL CARTON (40 PIECES) OF THE MATT FINISH SMALL SQUARE PHOTO SLATES. FOR SINGLE PIECES CLICK HERE

IMPORTANT: THESE SLATES COME WITH A MATT FINISH NOT GLOSSY FINISH. IF YOU ARE LOOKING FOR GLOSSY SLATES PLEASE CLICK HERE.

  • High quality black slate with smooth and even white sublimation coated area for printing photos or bespoke artwork
  • A completely unique way of displaying pictures around the home or office

Please Note: Due to the natural composition of slate, slight variations in size, shape, texture, and edge finish are completely normal and to be expected. These natural characteristics are part of what makes each photo slate unique. All sublimation photo slates—regardless of manufacturer—may differ slightly from the stated dimensions. As such, minor discrepancies will not be considered defects and are not eligible for refunds or replacements.

Troubleshooting & Tips

We have tested these photo slates and recommend pressing them upside down so that the heat goes through the back of the photo slate. Heating the paper directly can cause the paper to burn and the result will not be as required.

If you are not getting good results by heating through the slate you can also heat the slate face up i.e. heating the sublimation paper directly. However if you are doing this please ensure you halve the heating time listed below. e.g. if it says 8 minutes change this to 4 minutes.

We always recommend using our 2mm thin silicone FAB Pad so that you can sublimate on the rough edges of the slate to create a seamless image.

Larger slates are generally not suitable for clamshell presses as placing the slate too close to the hinged area can apply too much pressure and crack the slate. Swing away presses are best suited for this.

We also recommend pre-heating slates if they have been stored in a colder area as the sudden temperature change can cause cracking.

Important Note: The times and temperatures below apply only to the equipment listed in the Specifications tab. These are guideline settings based on tests we've run using various machines to reflect typical customer setups. Your results may vary depending on your equipment, so some trial and error may be needed. Please contact us if you're unsure, as we can't be responsible for issues caused by incorrect settings.

  • Pressing Time
    8 Minutes
  • Temperature
    200 Degrees
  • Pressure
    Medium
  • Equipment
    Flat Press
  • Material
    Slate
  • Dimensions
    15cm x 15cm x 0.5cm
  • Finish
    Matt
  • Colour
    White / Black
  • Print Applications
    Dye Sublimation