Fototafel – Hochglanzoberfläche – 30 cm x 30 cm – QUADRATISCH
Fototafel – Hochglanzoberfläche – 30 cm x 30 cm – QUADRATISCH - Single ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
- Hochwertige schwarze Schieferplatte mit glatter und gleichmäßig weißer Sublimationsbeschichtung zum Drucken von Fotos oder maßgeschneiderten Kunstwerken
- Kommt mit Hochglanzoberfläche (keine matte Oberfläche)
- Eine völlig einzigartige Möglichkeit, Bilder zu Hause oder im Büro zu präsentieren
- Maße: 30 cm x 30 cm mit einer bedruckbaren Fläche von 28,5 cm x 28,5 cm
- Auch in den Größen 15 cm x 15 cm und 20 cm x 20 cm erhältlich
- BITTE BEACHTEN: Bei diesen Fototafeln müssen Sie diese kopfüber drücken, damit die Hitze durch die Tafel dringt. Erhitzen Sie das Papier nicht direkt, da es sonst verbrennt und die Oberfläche nicht wie gewünscht aussieht. Die Verwendung einer Silikonmatte hilft dabei, die rauen Kanten der Tafel zu sublimieren und ein nahtloses Bild zu erzeugen.
- Atemberaubende Fotos mit lebendigen Farben als Alternative zu herkömmlichen Bilderrahmen
- Personalisierte Schilder für Hochzeiten oder besondere Anlässe
- Maßgeschneiderte Kunstwerke oder Designs auf dieser polierten Steinplatte
Please Note: Due to the natural composition of slate, slight variations in size, shape, texture, and edge finish are completely normal and to be expected. These natural characteristics are part of what makes each photo slate unique. All sublimation photo slates, regardless of manufacturer, may differ slightly from the stated dimensions. As such, minor discrepancies will not be considered defects and are not eligible for refunds or replacements.
Troubleshooting & Tips
Troubleshooting & Tips
We have tested these photo slates and recommend pressing them upside down so that the heat goes through the back of the photo slate. Heating the paper directly can cause the paper to burn and the result will not be as required.
If you are not getting good results by heating through the slate you can also heat the slate face up i.e. heating the sublimation paper directly. However if you are doing this please ensure you halve the heating time listed below. e.g. if it says 8 minutes change this to 4 minutes.
We always recommend using our 2mm thin silicone FAB Pad so that you can sublimate on the rough edges of the slate to create a seamless image.
Larger slates are generally not suitable for clamshell presses as placing the slate too close to the hinged area can apply too much pressure and crack the slate. Swing away presses are best suited for this.
We also recommend pre-heating slates if they have been stored in a colder area as the sudden temperature change can cause cracking.
Fototafel – Hochglanzoberfläche – 30 cm x 30 cm – QUADRATISCH
Important Note: The times and temperatures below apply only to the equipment listed in the Specifications tab. These are guideline settings based on tests we've run using various machines to reflect typical customer setups. Your results may vary depending on your equipment, so some trial and error may be needed. Please contact us if you're unsure, as we can't be responsible for issues caused by incorrect settings.
-
Pressing Time
-
Temperature
-
Pressure
-
Equipment
-
Material
-
Dimensions
-
Finish
-
Colour
-
Print Applications
Fantastic results very pleased
Great size and quality
Really nice slate, takes colour well. Nice glossy finish.
Great service
Looks professional when complete would recommend
Once again terrific service. All photo slate sizes have came out crystal clear and my customers adore them and display them inside andoutside.
I buy quite often from Longforte, and it’s always a pleasure doing business with them ,easy shopping quick delivery thank you
These slates are fantastic, the colour transfer is superb and they look amazing once complete, absolutely returning to buy more when needed, very impressed 😀
Very good to deal with and reasonably priced
Brilliant item can't wait to get creative 😀
