Flaschenverschluss mit quadratischem Metalleinsatz
Flaschenverschluss mit quadratischem Metalleinsatz ist auf Lager und wird versandt, sobald es wieder verfügbar ist
Verfügbarkeit für Abholungen konnte nicht geladen werden
- Schwerer und solider Weinflaschenverschluss aus Metall
- Verfügt über Gummiseiten, um einen vollständig luftdichten Verschluss zu schaffen
- Kommt mit einem quadratischen bedruckbaren Einsatz, um Ihr eigenes Design hinzuzufügen, der mit einem selbstklebenden Streifen am Hauptstopper haftet
- Auch mit rundem Metalleinsatz erhältlich
Flaschenverschluss mit quadratischem Metalleinsatz
Important Note: The times and temperatures below apply only to the equipment listed in the Specifications tab. These are guideline settings based on tests we've run using various machines to reflect typical customer setups. Your results may vary depending on your equipment, so some trial and error may be needed. Please contact us if you're unsure, as we can't be responsible for issues caused by incorrect settings.
-
Material
-
Finish
-
Colour
-
Print Methods
First off, this isn't related to Longforte as I've always experienced excellent service when reaching out to them. I've had around 60 of these stoppers, both round and square and there is a manufacturing issue with the inlay the sub disc is affixed to.
It would appear this inlay is actually another sub disc but fitted in reverse, so it's glued to the protective film that's covering it. When you affix this disc to this, the pressure you apply weakens the bond and they just drop out. To fix this, don't bother with the inlay that's glued in, remove that by simply twisting. Then apply some superglue or epoxy resin and hold in place with two clothes pegs until dry. If you don't do this you'll end up with returns from customers - don't ask me how I know!
That aside, they really are good quality. All the manufacturers need to do is remove the film before gluing the inlay in place.
brilliant
